iWatch will use low power LED screen

Smart watches are an extension of the smartphone's capabilities, but at the same time, it also "geneticizes" the tragic genes that smartphones have too short a battery life. For a watch, one charge per day or even one day is certainly not tolerable. In order to better provide a battery life experience, Samsung and Sony are racking their brains, and Apple, which is about to launch the iWatch smart watch, is also looking for "secret weapons."

According to foreign news, Apple has acquired a technology company called LuxVue. It is understood that LuxVue is mainly engaged in the research and development of micro LED technology. The company's technology can make the display of small mobile devices get better display performance and reduce energy consumption. Therefore, many people believe that Apple's acquisition is mainly to provide iWatch with strong technical support.

The usual display technology is to put a white light on each pixel and then filter out the colors you don't want. LuxVue's technology is to put two red, green and blue LED lights at each point, not only the brightness will be Greatly improved (9 times that of ordinary screens), its energy consumption will also be effectively reduced, thus improving the battery life.

In addition to bringing good endurance and display experience, even better, the LuxVue technology display is also suitable for curved screens. If Apple wants to use a flexible screen on iWatch, it is no problem.

Edit: Cedar

Fingerprint Lock Motor introduction:

Basic security work, lock body responsible for the security door lock body responsible for opening and closing lock, the lock body  Lock Motor  is of crucial importance.

Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc

Features:Fingerprint Lock Motoris based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;

This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability

Method of use: the best stable in horizontal plane, installed on the Fingerprint Lock Motoroutput shaft parts, cannot use a hammer to knock, knock prone to press into the dc Fingerprint Lock Motor  drive, may cause damage to internal components, and cannot be used in the case of blocked.

Operating temperature range:

 lock motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a  lock motor  is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.

Storage temperature range:

Fingerprint Lock Motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.

Service life:

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.

when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you

Looking forward to your inquiry. Welcome to our factory.

Fingerprint Lock Motor

Fingerprint Lock Motor,Motor For Fingerprint Lock,Gear Motor For Fingerprint Lock,Dc Motor For Fingerprint Lock

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com