Power supply, equipment and environment coherence (top)

What is "pull line", the so-called "pull line" is to re-pull a power cord from the main switch of your home to the audio, which is the audio line dedicated to the audio, referred to as "special line." As for why you want to pull the line? This is because the sound energy of the sound is "electricity", and whether it is internal signal reading, transmission, or finally pushing the speaker, all the links are driven by "electricity", so the power quality is good. Bad will directly affect the performance of the sound.

The picture above is a schematic diagram of the special line. As you can see from this picture, the so-called "sound line" is actually no different from the power socket in the original home. The only difference is that other sockets may have TVs, refrigerators, computers, Electric fans and other equipment, and "sound line" is only used to install audio equipment, including sources, amplifiers and so on. This is because if other electrical devices, such as refrigerators and TVs, are plugged into the power circuit used in the audio, not only will the audio not be able to get enough power (because it is separated by other appliances), but even because The operation of other electrical appliances causes interference to the sound system, resulting in problems such as poor sound performance. For example, sometimes when the refrigerator compressor in the home starts or turns on the light, it will cause the sound of the sound to be "wave". It is because the sound is connected in parallel with these appliances in the same circuit, so it will be emitted by these electrical devices. Bobo sound.

In this way, everyone should know why playing the sound to the end often wants to help the entire audio system to pull a "special line", right? It is precisely because I hope that the power supply can be used to 100% of the performance of the existing system. In other words, if the power supply from the source can not meet the demand of the audio, then how to adjust the audio equipment, replace the high-grade wire is only a little reinforcement, can not do the basic sound performance and sound quality.

But what is the relationship between audio line power and equipment, and the environment? The technical director of our US KSP panoramic sound will be described in detail in the next article, so that everyone can make a reference when pulling the line!

Game Machine Wire Assembly

we are ok to provide cable assembly design assistance, rapid in-house prototyping(CAD, SOLIDWORK), manufacturing engineering, tool making, also accept flexible Qty,even including working round-the-clock to meet tight turning-round time requirements.

Our wire harness products are customized for various industry, like automotive, elecrical, mechanical, etc.

<

<

Game machine wire assembly, wiring harness for game machine, electrical wiring harness, custom wire harness for game machine

ETOP WIREHARNESS LIMITED , http://www.wireharness-assembling.com