Smart home product switch and socket panel introduction parameters

The switch and socket panel in the ZigBee network has the same function as the switch and socket panel described in Chapter 2. Different switch and socket panels contain ZigBee chips and receive control signals from the ZigBee wireless gateway.

Socket panel

The ZigBee socket panel developed by Nanjing Pyramid Sensing Technology Co., Ltd.

ZigBee socket panel is based on advanced ZigBee/SmartRoorn technology, in line with national unified standards, intelligent design, will be two-phase, three-phase plug integration. The mobile terminal can be turned on and off in real time or at regular intervals, which is energy-efficient, safe, and reliable. In addition to its use in smart homes, the product is also widely used in smart hotels, smart hospitals and smart buildings.

Its main parameters are as follows

1) Communication method: IEEE802.15.4 (ZigBee/SmartRoom).

2) Communication distance: 100m (under visual conditions).

3) Power requirements : 110-240V.

4) Operating temperature : -10 to +55°C.

2. Switch panel

ZigBee switch panel and dimming panel developed by Hangzhou Crystal Control Electronics Co., Ltd.

ZigBee light switch panel is a new type of product designed based on ZigBee protocol, which is mainly used for the switch of household common lamps. Compared with ordinary intelligent lighting panel, it has the function of self-grouping network, without learning code, easy to use; and with the host, you can use mobile phones, computers, tablet computers and other mobile terminals, real-time viewing and remote control of home lighting switch.

Its main parameters are as follows

1) Product size : 86rnmX 86mm X 30.5mm.

2) Product weight : 490g.

3) Product color : white/champagne (large quantity can be customized).

4) Load power : 300W per channel.

5) Standby power : ≤ 25mW.

6) Operating voltage : AC110-250V/50-60Hz.

7) Transmission distance : According to the ZigBee device layout.

8) Status feedback: Support.

9) Touch screen : High quality key glass (hardness greater than 4H).

10) Working environment : -40 to +85°C.

11) Network capacity: 65000 modules.

12) Connection mode : Zero fire connection.

13) Operating frequency : 2.4 GHz.

14) Control mode : touch, remote control.

3. Dimming panel

ZigBee dimming panel is a new product designed based on the ZigBee protocol and is mainly used for the brightness adjustment of common household lamps. Compared with ordinary intelligent dimming panel, it has the function of self-grouping network, without learning code, easy to use; long-press panel dimming button, can achieve stepless dimming; and cooperate with the host, through the mobile phone, computer and tablet The electrodeless finger-slider dimming band on a mobile terminal such as a computer can be remotely adjusted and the brightness of the home light can be viewed in real time.

The ZigBee dimming panel is widely used in homes, offices, hospitals, hotels and other occasions and is the mainstream of current panels. At present, this panel can only be used with the KC868-F network of smart home hosts. The connection mode is zero fire wiring, and there are white and champagne colors to choose from.

Its main parameters are as follows

1) Product size : 86mmX 86mmX 30.5mm.

2) Product weight : 498g.

3) Load power : 300W per channel.

4) Standby power : ≤ 25mW.

5) Working voltage : AC 110- 250V/50 60Hz.

6) Transmission distance : According to the ZigBee device layout.

7) Working environment: -40 to +85°C.

8) Network capacity : 65000 modules.

9) Connection mode : Zero fire wiring.

10) Operating frequency : 2.4 GHz.

11) Control mode : touch, remote control.

12) Status feedback : Support.

13) Touch screen : High quality tempered glass (hardness greater than 4H).

14) Product color : white/champagne (large quantity can be customized).