First, LED history 50 years ago people have already understood the basic knowledge of semiconductor materials can produce light. In 1962, General Electric's Nick Holonyak Jr. developed the first practical application of visible light LEDs. LED is the abbreviation of English light emitting diode. Its basic structure is an electroluminescent semiconductor material placed on a leaded shelf and then sealed with epoxy resin, that is, solid package, so it can To protect the internal core wire, the LED has good seismic performance. Originally used as an indicator light source for instrumentation, LEDs of various light colors have been widely used in traffic lights and large-area displays, resulting in good economic and social benefits. Taking a 12-inch red traffic light as an example, in the United States, a long-life, low-efficiency 140-watt incandescent lamp was used as a light source, which produced 2000 lumens of white light. After passing the red filter, the light loss is 90%, leaving only 200 lumens of red light. In the newly designed lamp, Lumileds used 18 red LED light sources, including circuit losses, to consume 14 watts of electricity, which would produce the same light effect. Automotive signal lights are also an important area for LED light source applications. Second, the principle of LED chip: LED (Light Emitting Diode), LED, is a solid-state semiconductor device, which can directly convert electricity into light. The heart of the LED is a semiconductor wafer. One end of the wafer is attached to a holder, one end is the negative pole, and the other end is connected to the positive pole of the power supply, so that the entire wafer is encapsulated by epoxy resin. The semiconductor wafer consists of two parts, one part is a P-type semiconductor, in which the hole dominates, and the other end is an N-type semiconductor, which is mainly electrons here. But when the two semiconductors are connected, they form a "PN junction" between them. When a current is applied to the wafer through the wire, the electrons are pushed toward the P region. In the P region, electrons recombine with the holes, and then the energy is emitted in the form of photons. This is the principle of LED illumination. The wavelength of light, which is the color of light, is determined by the material that forms the PN junction. Third, the classification of LED chips: 1. MB chip definition and feature definition: MetalBonding (metal adhesion) chip; this chip belongs to UEC's patented product. Features: (1) Using a high heat dissipation coefficient material - Si as a substrate, heat dissipation is easy. ThermalConductivity GaAs: 46W/mK GaP: 77W/mK Si: 125-150W/mK Cupper: 300~400W/mk SiC: 490W/mK (2) Wafer bonding the epitaxial layer and the substrate through the metal layer while reflecting Photons to avoid absorption of the substrate. (3) The conductive Si substrate replaces the GaAs substrate and has good thermal conductivity (the thermal conductivity is 3 to 4 times different), which is more suitable for the high drive current field. (4) The bottom metal reflective layer is beneficial to the improvement of luminosity and heat dissipation. (5) The size can be increased and applied to the Highpower field, eg: 42 mil MB. 2. GB chip definition and feature definition: GlueBonding (adhesive bonding) chip; this chip belongs to UEC's patented product. Features: (1) The transparent sapphire substrate replaces the light-absorbing GaAs substrate, and its light output power is more than twice that of the conventional AS (Absorbable structure) chip. The sapphire substrate is similar to the TS chip GaP substrate. (2) The chip emits light on all four sides and has an excellent pattern. (3) In terms of brightness, the overall brightness has exceeded the level of the TS chip (8.6 mil). (4) The two-electrode structure is slightly inferior to the TS single-electrode chip in terms of high current resistance. 3. TS chip definition and feature definition: transparentstructure (transparent substrate) chip, which is a patented product of HP. Features: (1) The chip process is complex and much higher than ASLED. (2) Excellent reliability. (3) A transparent GaP substrate that does not absorb light and has high brightness. (4) Wide range of applications. 4.AS chip definition and feature definition: Absorbablestructure (absorbent substrate) chip; After nearly 40 years of development efforts, Taiwan LED optoelectronic industry is at a mature stage for the development, production and sales of this type of chip, major companies are here The level of R&D is basically at the same level, and the gap is not large. The mainland chip manufacturing industry started late, and its brightness and reliability still have a certain gap with the Taiwanese industry. Here we talk about the AS chip, especially the UEC AS chip, eg: 712SOL-VR, 709SOL-VR, 712SYM- VR, 709SYM-VR, etc. Features: (1) Four-element chip, prepared by MOVPE process, brightness is brighter than conventional chips. (2) Excellent reliability. (3) Wide range of applications. Fourth, LED chip material epitaxial type 1. LPE: LiquidPhaseEpitaxy (liquid phase epitaxy) GaP / GaP 2. VPE: VaporPhaseEpitaxy (vapor phase epitaxy) GaAsP / GaAs 3. MOVPE: MetalOrganicVaporPhaseEpitaxy (organic metal vapor phase epitaxy AlGaInP, GaN 4.SH: GaAlAs/GaAsSingleHeterostructure (single-isotype structure) GaAlAs/GaAs 5.DH: GaAlAs/GaAsDoubleHeterostructure (double-isotype structure) GaAlAs/GaAs 6.DDH: GaAlAs/GaAlAsDoubleHeterostructure (double-isotype structure) GaAlAs/GaAlAs 5. Composition of LED chip and composition of LED chip: There are mainly several kinds of elements such as arsenic (AS) aluminum (AL) gallium (Ga) indium (IN) phosphorus (P) nitrogen (N) bismuth (Si) composition. Classification of LED chips: 1. According to the brightness of the light: A, general brightness: R, H, G, Y, E, etc. B, high brightness: VG, VY, SR, etc. C, super high brightness: UG, UY, UR, UYS, URF, UE D, invisible light (infrared): R, SIR, VIR, HIR E, infrared receiving tube: PT F, photocell: PD 2, according to the composition of elements: A, binary wafer (phosphorus, gallium): H, G, etc. B, ternary wafer (phosphorus, gallium, arsenic): SR, HR, UR, etc. C, quaternary wafer (phosphorus, aluminum , gallium, indium): SRF, HRF, URF, VY, HY, UY, UYS, UE, HE, UG 3. LED chip characteristics table: LED chip model illuminating color component element wavelength (nm) SBI blue lnGaN/sic430HY super bright yellow AlGalnP595 SBK brighter blue lnGaN/sic468SE highlight orange GaAsP/GaP610 DBK brighter blue GaunN/ Gan470HE super bright orange AlGalnP620 SGL green lnGaN/sic502UE brightest orange AlGalnP620 DGL brighter green LnGaN/GaN505URF brightest red AlGalnP630 DGM brighter green lnGaN523E orange GaAsP/GaP635 PG pure green GaP555R red GAaAsP655 SG standard green GaP560SR Brighter red GaA/AS660 G green GaP565HR super bright red GaAlAs660 VG brighter green GaP565UR brightest red GaAlAs660 UG brightest green AIGalnP574H high red GaP697 Y yellow GaAsP/GaP585HIR infrared GaAlAs850 VY brighter yellow GaAsP/GaP585SIR infrared GaAlAs880 UYS brightest yellow AlGalnP587VIR Infrared GaAlAs940 UY Brightest Yellow AlGalnP595IR Infrared GaAs940.
Plug-in fuses are designed to be inserted into the fuse box. Fuse is small safety part in an electrical device or piece of machinery that causes it to stop working if the electric current is too high, and so prevents fires or other dangers. Fuse in the abnormal current increases to a certain height and heat, its own fuse to cut off the current, to protect the safe operation of the circuit fuse protection power equipment with current overheating damage, avoid electronic equipment serious damage caused by internal fault. When a circuit breaks down or is abnormal, the current increases with the current and the increased current may damage some important components in the circuit, and it may also burn the circuit and even cause a fire. If correctly placed in the circuit fuse, the fuse will be abnormal current increases to a certain height and heat, its own fuse to cut off the current, so as to protect the safe operation of the circuit.
Auto Plug-In Fuses,Plug-In Style Fuses,Blade Fuse,Mini Auto Plug-In Fuse Heshan Jianhao Lighting Industrial Co., Ltd. , https://www.sunclubtw.com