The concept of strong electricity is relative to weak electricity. Strong and weak currents are separated by voltage. The working voltage is more than 24V AC is strong, and the following is weak. Strong wires generally refer to transmission wires with an AC voltage of more than 24V. Such as home lights, sockets, etc., the voltage is 110 ~ 220V. Strong wires can also affect nearby communication lines. The following describes the knowledge of strong wire protection. High Current Cable,Pvc Insulated Copper Core Wire,Bvr Electric Cable,Bv Power Cable Jiangsu QiSheng Cable Co., Ltd. , http://www.shuaihe-cable.com
0.6/1kv XLPE Insulated Service Drop Cable Aluminum Preassemble Cable Overhead Aerial Bundled Conductor ABC Cable
APPLICATION:
The product is a new type of aerial cable for power transmitting . It is extensively used in overhead power transmission line. It improves the safety and reliance of electrified wire netting . It is primarily used on lighting, outdoor lighting,and temporary service for construction . To be used at voltage of 600V phase-to-phase or less,and the conductor temperatures no exceed 75degred for polyethylene insulated conductors 90degree for crosslinked polyethylene (XLPE) insulated conductors.
CONSTRUCTION:
  Conductors are concentrically stranded,compressed 1350-H19 aluminum. Insulated with either  polyethylene or crosslinked  polyethylene (XLPE). Neutral messengers are concentrically stranded 6201, AAC,or ACSR .
The product is a new type of aerial cable for power transmitting . It is extensively used in overhead power transmission line. It improves the safety and reliance of electrified wire netting . It is primarily used on lighting, outdoor lighting,and temporary service for construction . To be used at voltage of 600V phase-to-phase or less,and the conductor temperatures no exceed 75degree for polyethylene insulated conductors 90degree for crosslinked polyethylene (XLPE) insulated conductors.
Construction
  Conductors are concentrically stranded,compressed 1350-H19 aluminum. Insulated with either  polyethylene or crosslinked  polyethylene (XLPE). Neutral messengers are concentrically stranded 6201, AAC,or ACSR .
Duplex service drop (Bare neutral messenger ACSR)
Â
Code word
AWG or kcmil
Bare neutral messenger
Phase conductorÂ
Weight kg/km
ACSR stranding and wires dia. (mm)
Rated strength (lbs)
AAC
Insulation thickness (mm)
Stranding and wires dia. (mm)
Setter
1*6AWG+1*6AWG
1/1.68+6/1.68
1190
1/4.11
1.14
111
Shepherd
1*6AWG+1*6AWG
1/1.68+6/1.68
1190
7/1.56
1.14
113
Eskimo
1*4AWG+1*4AWG
1/2.12+6/2.12
1860
1/5.19
1.14
171
Terrier
1*4AWG+1*4AWG
1/2.12+6/2.12
1860
7/1.96
1.14
173
Chow
1*2AWG+1*2AWG
1/2.67+6/2.67
2850
7/2.47
1.14
266
Bull
1*1/0AWG+1*1/0AWG
1/3.37+6/3.37
4380
19/1.89
1.52
427
(1) Different AC frequencies
The frequency of strong electricity is generally 50Hz (Hz), which is called "power frequency", which means the frequency of industrial electricity: the frequency of weak electricity is often high frequency or ultra-high frequency, measured in KHz (kilohertz) and MHz (megahertz).
(2) Different transmission methods
Strong electricity is transmitted on transmission lines, and weak electricity transmission is divided into wired and wireless. The radio transmits electromagnetic waves.
(3) Different power, voltage, and current
Strong electric power in KW (kilowatts), MW (megawatts), voltage in V (volts), KV (kilovolts), current in A (ampere), kA (kiloampere); weak electric power in W (watts) , mW (milliwatts), voltage in V (volt), mV (mV), current in mA (milliampere), uA (microampere), so its circuit can be printed circuit or integrated circuit composition.
There are also high-frequency (hundreds of KHz) and medium-frequency devices in high-voltage power supplies, but the voltage is high and the current is large. Due to the development of modern technology, weak electricity has penetrated into the field of strong electric power, such as power electronic devices, wireless remote control, etc., but these can only be regarded as the weak electric control part in strong electric power, and it is still different from the controlled strong electric power.
According to the basic principle of weak electricity transmission signals and strong electric conduction, we can easily distinguish between strong electricity and weak electricity. For example, although electric shavers, flashlights, etc., use only two dry batteries (3V), we cannot think that they are weak because the voltage and current of the appliances are small, because they conduct electricity rather than signals, so they should be classified as strong. class.
From the above description, the relationship between the four can be roughly stated as follows:
High voltage must include strong electricity, and high voltage does not necessarily belong to high pressure.
Low voltage must include weak electricity, weak electricity must belong to low pressure;
Low voltage is not necessarily strong, and strong power is not necessarily low pressure.
The use of strong electricity
Strong electricity generally refers to the mains power system\lighting system and other power supply and distribution systems, including air conditioning lines, lighting lines, outlet lines, power lines, high-voltage lines and the like. There are two types of weak electricity: one is the state-designed safe voltage level and control voltage and other low-voltage electric energy, and there are AC and DC points, such as 24V DC control power supply, or standby power supply for emergency lighting. The other is information sources that carry information such as voice, images, and data, such as audio, video lines, network lines, and telephone lines. DC voltages are generally within 36V. Electrical appliances such as telephones, computers, televisions (cable television lines), audio equipment (output lines), broadcasting systems, and building automation (such as access control and security) in household electrical appliances are all weak electrical equipment.
In power systems, voltages below 36V are called safe voltages, voltages below 1kv are called low voltages, voltages above 1kv are called high voltages, and lines that directly supply power to users are called distribution lines, such as user voltages are 380/220v, It is called a low-voltage distribution line, which is the strong electricity in home decoration (because it is the highest voltage for home use). Strong electric generally refers to direct current voltage above 24V. Such as home lights, sockets, etc., voltage 110V ~ 220V. Electrical appliances for home lighting, electric water heaters, heaters, refrigerators, televisions, air conditioners, audio equipment, etc. are all electric equipment.