TV wall with stress: safety is the first and then it is beautiful to use

Today's TV is more and more concerned with the design. In the past, the “big ass” CRT TV was one of the household appliances that occupied the most places in the home. However, the appearance of plasma, LCD, and other TVs made the thickness of TV screens low. The emergence of a large number of ultra-thin TVs made the TV's body become the decoration of the room.


TV wall is very beautiful

As the best way to present ultra-thin TVs, there is no doubt that TVs are hung on the walls. This will not only improve the viewing angle, but also make the appearance of the TV more refined and blend in with the decoration of the entire room. However, TV wall hangings also have a lot of attention. Otherwise, if there are problems, the suspension will be unstable, and the television will be injured. Even if it comes to children, it is not good.

First of all, in order to ensure stability, the wall of the TV suspension must be a load-bearing wall. The so-called bearing wall refers to the wall that plays a supporting role in the house. In general, the framework around the building is a load-bearing wall, and the internal wall is generally not a load-bearing wall; while the self-built brick houses are all load-bearing walls. Of course, if you are not sure, the most secure way is to find a developer or property to request a drawing of your house.


The foam bricks that are common in the partition walls cannot hold televisions.

Second, we must choose a rack. Different TVs must be equipped with suitable racks for normal use. There is no problem in using the racks provided by the manufacturers, but the prices are usually not very friendly. If you want to buy a third-party rack, be sure to ask the rack in advance. Does the salesperson support television at home to avoid spending money. The TV and the rack are connected through a set of screws at the rear of the TV. The hole spacing is generally divided into many sizes, such as 100×100, 200×200, 400×400, etc. Generally speaking, as long as the rack supports the hole pitch of the TV response, both are It can be installed normally.


Screws, which are used to connect the racks

Of course, it is also important to determine the position of the pylon. The height of the pylon should be the same as the head-up height of the audience sitting on the sofa. After the television is installed, the viewer's line of sight is right at the center of the TV screen. Many pylons now have tilt, tilt, and tilt adjustments to achieve more flexible viewing angles.

Supports different angle adjustment racks

Finally, in order to ensure the stability of the pylon and the safety when watching television, it is best to install the pylon and ask a professional to install it and use different fixing bolts for different walls. After the hanger is mounted, shake it with your hands, and the bracket itself will not shake. Otherwise, you need to re-fix or tighten the fixing nut on the bracket.

Antenk Battery Holders for Cylindrical Cells 
Thru Hole and Surface Mount or with Wire Leads
For A, AA, AAA, 1/2AA, CR2, CR123A, 1/3N,C, D, N, 12 Volt, 18350, 18650, 26650 Batteries

Antenk Battery Holders for Cylindrical Cells Type

Plastic Cost Effective Holders, Polyproplene base, coil spring contacts
PC Mountable and wire lead for on or off board applications
PC Connetcor for quick connection to automated board assemblies 
Snap On Connector for off board connection using 9V connection
High Performance Leaf Spring Holders, High Temp. Nylon Base
SMT Holders, Gold plated contacts
THM Holders, Tin-Nickel Plated Contacts
Solder Lug Holders, for remote wiring applications 
High Performance Coil Spring Holders, High Temp. Nylon Base
SMT Holders, Gold plated contacts
THM Holders, Tin-Nickel Plated Contacts
cylindrical battery holders

Cylindrical Cell-holders

Battery Holder,Cylindrical Cell Holders,Cylindrical Battery Bracket,Custom Cylindrical Cell Holders,Battery Holders Cylindrical,18650 Battery Holders,alkaline batteries Holders

ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com